ART SPLITCom Pro
Mic Splitter / Combiner
Unopened, unused item.
This splitter can be used to divide one microphone signal into two outputs, or as a combiner to merge two microphone signals into one output.
When used as a combiner, the PHASE switch allows you to invert the polarity of the isolated microphone input, helping to save mixer channels.
β Type: Mic Splitter, Combiner
β Frequency Response: 20Hz - 150kHz
β Input/Output Terminals: XLR
β THD + Noise: 0.0007%
β PHASE Switch
β Ground Lift Switch
β Typical Driving Source Impedance: 150Ξ©
β Typical Output Load Impedance: 1KΞ©
β Dimensions: 10.7 x 4.4 x 8.9 cm
β Weight: 0.3 kg
*When used as a combiner, phantom power from the mixer etc. will only pass through MAIN to MAIN and ISOLATED to ISOLATED. Therefore, it cannot be used to combine two condenser microphones.
*When used as a combiner, individual volume control for each microphone is not possible. Additionally, if one microphone has a switch and that switch is turned OFF, the other microphone will also turn OFF.
Daily Cleaning: Use a soft brush or damp cloth to gently wipe away dirt. Avoid harsh chemicals. For mesh areas, use diluted mild detergent and a soft brush.
Drying: Air dry in a cool, shaded place after cleaning. Avoid direct sunlight or high heat, which can cause fading and glue deterioration.
Storage: Stuff with paper to maintain shape when not in use. Store in a dry, ventilated area to prevent mold. Rotate between multiple pairs to extend lifespan.
Usage Notes: Designed for basketball. Not recommended for hiking, long-distance running, or other specialized sports where different performance features are required.
De kwaliteit is redelijk en het artikel is handig in gebruik. Het voldoet aan de verwachtingen en ik ben er over het algemeen tevreden mee.